What causes a treadmill belt to slip?
The main cause of the treadmill belt slipping is due to it being too tight. It is also possible that the belt has too much friction causing the treadmill to slip. To check the tightness of the treadmill one can lift it at the center.
If the gap is lesser than 2 or 3 inches then you can determine it is too tight. Loosening the belt would most likely fix the issue and decrease treadmill belt tension.
Why is the treadmill belt sticking?
Treadmill belt sticking is one of the common problems that is faced by treadmill owners. There are four reasons for a treadmill to stick and they are:
Incorrect tension applied: In case the tension is too high you can lower it with minor adjustments and have the issue fixed.
Damage: Inspect your belt and if you find if the belt on the treadmill is damaged. Using a damaged belt might do more harm than good. So, it is wise to consider a treadmill belt replacement.
Not enough lubricant: Sticking can also be caused due to a lack of lubricant on the treadmill. You can inspect the areas that need to be lubricated and continue to use it after the lubrication is done. Remember to use recommended lubricants and not just about anything you can find.
If it is off-center: This is a problem that can be fixed by ensuring that the treadmill is placed correctly after loosening it. Once it is straight you can tighten it to get rid of this problem.
Almost all of these problems can be fixed by doing a basic treadmill belt adjustment. You would not need expert help to fix the sticking of the treadmill and can be done with some basic tools.
How to clean a treadmill belt?
Cleaning of the treadmill belt at regular intervals is very important for its maintenance. A treadmill belt making noise may mean it requires cleaning. To clean the treadmill, you would have to ensure that the machine is unplugged from its power source.
Once unplugged you can use a duster that is anti-static to have all the dust that is accumulated over a while. Sweat and liquid spills can be wiped off the treadmill using a cloth that is a little damp.
After completing the above process, you can use a dry cloth to dry the treadmill. Ensure that your treadmill is running at a very slow pace while you do this.
What is a treadmill belt lubricant?
A treadmill belt not moving can be caused due to the lack of lubricant. The lubricant that is used for treadmills should either be manufacturer recommended or of a recognized brand. These lubricants are specially designed for use on treadmills.
Where to buy a treadmill belt or lubricant from?
You can purchase these lubricants or belts from a local or an online store for fitness equipment. Remember that lubricants that are not meant for treadmills can cause permanent damage to the equipment. Thus, it is important to select the best lubricant that is out there and the one recommended by the manufacturer.
How to tighten the treadmill belt?
To ensure that your treadmill works properly it is important to ensure it has the right tension. If the belt on your treadmill is loose or too tight it can cause unnecessary discomfort for the user.
Tightening or loosening of the treadmill belt can be done easily by almost anyone with the right tools. Each brand of a treadmill is different and hence the process can differ too. One of the main tools that you may require is an Allen wrench.
The bolt adjustment would ideally be placed at the base of most treadmill designs. An owner’s manual can guide you to the spot where the adjustment bolt is. Once you identify it you can turn it clockwise and anti-clockwise to tighten or loosen the belt.
Treadmill belt replacement
Almost all treadmills come with a service number you can get in touch with when faced with trouble. However, some people choose to do a treadmill belt replacement by themselves.
If you know the treadmill belt size you can purchase one locally or over the internet and have it replaced. Using an Allen key or wrench, screwdriver, and other basic tools depending on the treadmill brand.
Installing a new belt can be done once you slide it and over the board. By removing the corner screws, you can remove the old or damaged belt. If the sellers or to the right side you can fold the treadmill after placing the new belts on the rollers.
Once this is done you can install the screws that are used for mounting. You might be required to lower the treadmill to reinstall the rear and front rollers of the treadmill. Always check with the manual to ensure these things are followed to the book.